My hybrid inverter and 9.5 battery were installed yesterday. Battery charged up to 100% from grid then discharged to house in the evening and overnight down to 4%. I presume this was the calibration but have received no notification of this. Should I get this? If so, where would it appear?
Notifications in your portal. Side menu top 'Notifications'.
I had my install earlier this month, and thought the immediate charge from 26% to 100% was the calibration. Turned out it wasn't, and the actual calibration started the following day at around 14:00.
By then I had the GivEnergy App installed on my phone, so got immediate notifications of the start of the calibration, and also later once it had completed. I adjusted the charge and discharge rates to better align the calibration charge with my cheap rate overnight.
As @cluelesscris has stated, you can also see the notifications when using the web portal.
Thanks both for responding. Checked the app notification and my calbration did start when I thought and was complete twenty hours ago! Unfortunately, have an issue with PV MCB apparently tripping the CU RCCB so inverter now not drawing from the grid! Can’t really set up my timings until that is resolved.