Battery Discharge to Home

Battery discharge to Home
Tried different settings but can’t get fully charged batteries to discharge to home? Either by auto setting or manual.

Colin Fountain

CFountain I have had the same issue for the last 24 hrs. It appears to have happened after an inverter firmware update last night. See my previous post titled 'Inverter Stuck Charging Battery at 290W'.

I was hoping it may have been calibrating the battery and therefore when it reached 100% I would regain control, but that has not been the case.

CFountain is this a new system, or has something changed recently, or has this just started after a period of normal behaviour?
Are you trying to configure via the app, or web portal? (They use different terminology for some settings.)
The remote-control section on the web gives access to more parameters. There is a button there to set all prams to default, which might help.

Thanks DD My system is 6 months old and I have had no other issues up to this point. As per my other post I have tried all settings in both app and online portal. I also use GivTCP through Home Assistant so am fairly confident with settings. Mine was coincidental with an inverter firmware upgrade which finished at about 23:00 hrs on Friday night and the issue started about 30 mins later. I therefore wondered if anyone else had upgraded their firmware and experienced a similar issue.