I am trying to get grips with my solar panel and battery installation. Can someone confirm if and how I tap into the battery when it’s 100% charged rather than consume from the grid.
Battery Power usage over grid
Is it set to eco mode?
As far as I know it should be set to do that automatically but not certain. I’ve just had my install done too, would like to know if I can turn off my supply TO the grid until I get my export MPAN. Does anyone know how?
You’re obviously at the wind up!
The guy who done the install said the excess solar should only discharge when the battery is at 100% and the energy has no where else to go, is that correct?
Pakey07 That's a little oversimplified... it is not necessary for the battery to be at 100% for excess to be exported. There is an inverter power limit on DC output (eg 3.6kW for gen-3 hybrid), and you can limit that further through an inverter setting. And as the battery gets close to full, or when it gets cold, it can accept charge at a lower rate. Any time solar generation exceeds house consumption plus the charging limit, the excess will go to the grid.
Pakey07 As far as I know it should be set to do that automatically but not certain. I’ve just had my install done too, would like to know if I can turn off my supply TO the grid until I get my export MPAN. Does anyone know how?
If you create a free account at solcast.com.au and enter your solar panel details you can get a free solar forecast through the day. This can help you to decide if you can put the washing on for example on a sunny day and use the extra solar rather than let it get exported for free