Hi folks,
I've changed my WiFi network.
On checking what do to on the givenergy app, it says I need to remove the cover from my inverter to begin with.
I've removed the two screws from the bottom bit it's not budging.
Rather than break something, I wanted to check if anyone had done the same before? How did the panel come off?
Link to photo of inverter below.
Cheers! 
Hi - there are many posts on here about challenges when changing the wifi router. It's usually all down to the SSID and pwd changing when the new router arrives. The simplest thing to do would be to change the SSID and pwd on the new router to match what they were on the previous ones - then everything should connect (including all your wifi devices)
Ah, much obliged mate!
I've just changed about 15 devices, I'll need to go back and change them again 😅
Sounds like it's the best iron though 👍
Scottishcammy I'll need to go back and change them again
It's what I've always done being inherently lazy - the least path of resistance!!