Hi
simple question I think .... apologies!
I have Hybrid 5.0 Gen 1 and 3 x 8.2kw batteries
I have the https://givenergy.cloud/dashboard
but I cant see the SOC and other data for each individual battery! I'm sure its there... please point me in right direction!
You won't see that data for individual batteries on the portal. You can see more detail if you go the TCP route - down to individual cell voltages I believe.
wilfleek thanks!
any pointers how to setup TCP please?
Not from me I am afraid, but there are plenty on here with that knowledge - try looking at some of the GivTCP-specific threads.
Good luck!
wilfleek no probs...thanks!
in case it helps others landing here... I found
https://wiki.terravolt.co.uk/docs/givtcp-installation-version-1-1-7/
i now need to see if I can get my head round how to set it up!
Tim Adams Check out this Github repository. You will need to run a container in a docker to use it. That implies running docker on a computer. If you have a Raspberry Pi or Synology NAS to run docker, then you can leave it running all the time. Alternatively, you can install docker on a Linux or Windows desktop/laptop and just run it when you're wanting to look at the data. If that all sounds too complicated, there's currently no other way for you to access the data.
Tim thanks Tim! much appreciated
Tim Adams
My solution was a Raspberry Pi 400 for a £100 and then install Home Assistant and GivTCP. Pretty easy once I got my head round it and I am a numpty at this stuff.
Tim Adams that’s something I wrote.
It does require some basic knowledge- but should be simple enough.
thanks all!