My Giv-Bat 5.2 has been operating fine for the last 3+ years. However it has now developed a fault.
If the battery is charged to (say) 50% (either via the Inverter settings page or Octopus labs scheduler) when the charging is disabled the inverter/battery continues to maintain the charge at 50%. Similarly if I discharge the battery to 30% when I disable the discharge, the inverter/battery continues to maintain the charge at 30%.
Any assistance appreciated.
Robert
RobertSw have you checked the eco flag? Sounds like the behaviour you'd see if it was turned off.
Thanks for the suggestion. Yes, "Eco" flag is on (Inverter settings) and also the "Enable Eco mode thereafter" flag is set on the Octopus lab scheduler.
Have a look at this thread. https://community.givenergy.cloud/d/6357-help-inverter-has-started-charging-battery-seemingly-randomly-not-on-schedule , if you have done an export to a level then it seems to set a minimum level in the invertor that the invertor holds even if the export is disabled. you need to reset any export minimum to 100% to get rid of it.