Data in wrong columns in monthly energy graph CSV

I wanted to download daily data over a month, and tried the Energy Graph (beta), but this breaks everything down to 30 min segments which is not much use if the daily total is wanted. I then tried the "old" Energy Graph and downloaded the csv with data summed for the day. All seemed good, except the solar data did not tally with my panel outputs given by solar edge portal. Closer inspection of the CSV showed that the given totals for the headings are correct, but the data in the columns are wrong (checked by manually summing the data). It seems in the CSV, the daily column data are actually mapped like this:

Solar to Home - OK
Grid to Home - is actually Solar to Battery
Battery to Home - is Solar to Grid
Solar to Battery - is Grid to Home
Solar to Grid - is Battery to Home
Grid to Battery - is Solar to Grid
Battery to Grid - OK

Tried it for the last two months, anyone else noticed a problem like this?

ifgow yup I found the same - see here:
https://community.givenergy.cloud/d/3916-monthly-report-battery-losses/8

Also there’s a question of the accuracy of the dashboard graph data vs the data you can extract from the portal a different way… the suggestion is that the inverter > meter data is more accurate.

26Left thanks, have replied on original thread!

Just found the same issue - the hard way - also noted that whilst grid to battery during the cheap period was recorded at 0.7KW/30 mins (in sync with Octopus supply date) the SOC % was jumping up at a faster rate - the change in % suggested a charge rate of 2.4KW/30 mins (which exceeds the max discharge rate)