Tag: Hybrid
- Reg.inverter and battery
- 3rd Party Low-Voltage Battery Support?
- Wifi to Ethernet
- Can I really be exporting this much
- Gen 1 Inverter efficiency query
- Price of 5kw hybrid gen 2/3 inverter - pre and post closure?
- Timed export - start time problem
- Gen 3 Inverter - Cannot Connect
- BMS Dead?
- Battery over voltage alarms
- Wrong readings and minimal battery discharge
- What if the WiFi dongle fails?
- Self consumption not working properly
- Charge / Discharge max. limits changing
- eco
- Hybrid inverter not keeping gird consumption at 0
- Disabled Axle but they are still controlling
- Inverter lost
- Axle Energy
- GET SUPPORT FOR YOUR GIVENERGY SYSTEM FROM PAUL LANDREGAN & TEAM
- Inverter not recognising solar energy
- Support Seems to be out there
- How to specify inverter IP (manually)
- GivEnergy Ltd in the UK Collapse !!!!
- No App and No Web Access !!!!
- GivEnergy Inverter Communication Issue
- restart system due to 1 battery not charging
- Battery stopped operating as scheduled
- Certificates etc after an Installation
- bit of weird one
- BMS Reverse engineering project...
- PV not generating
- Wi-Fi reset button on AIO2?
- No Solar generation
- Batteries stopped charging/discharging
- GE app has stopped working
- "Top" missing off generation
- Dying Inverter?
- Hardware being sold off cheap?
- AIO2 specific concerns considering Giv going bust
- Octopus Agile - import and export?
- Strategy if/when kit fails?
- Secondary Battery No Longer Detected.
- Gen 3 LV Hybrid internals
- Non functioning system
- Replacement inverter day
- Rubikcube's Inverter Monitor App after the upcoming changes
- Which source for accurate solar
- App. stopped working 3 mths ago and GivEnergy charging for cloud.
- Offline System & Batteries
- First steps with Home Assistant
- Home Consumption Reporting Issue
- Best way for stats collection and reporting post cloud
- voltage drop in solar cable
- Fan Fault
- Stuck on 200w discharge
- No PV production since update
- Disabling Open Dongle WiFi SSID
- Heat pump metering
- New firmware and battery software
- New Inverter and Battery firmware: D0.318-A0.318 and 3022
- Hybrid Inverter 3.6 Gen3 - Maximum battery charge power
- multiple power outages / EPS failed to kick in
- Anyone else considering moving on from Givenergy?
- My electricity KWH on my British Gas bill is...
- Lost Data and Power spikes!?
- Octopus Savings Sessions
- Inverter re-purposed but no-one can get it to work
- Inverter Monitor - Extended Controls
- Re-site or Replace dilemma
- GivEnergy Batteries Stuck in Calibration Mode (Stage 6) – Solved
- ECO randomly turned off by server
- octopus prices are off in the GE app
- Physically disconnecting a battery
- GivEnergy Support Speed & Telephone Answer AI bot
- Inverter ignoring settings: battery doesn't discharge <20%
- Accessibility for the blind
- Upgrading Gen 2 Inverter from 3.6kW-5kW
- Battery just charged at 200W last night???
- Smart Tariff Automation fault
- 20 month stats / EOY 2025
- stuck in waiting mode
- Offline system
- 4G dongle stopped working and signals a no connection!
- POOR CUSTOMER SERVICE FROM GIVENERGY
- Axle VPP
- SOC shown always 100% after time charges
- EV Battery drain - Technical confusion
- Gen1 hybrid SOC stuck in cloud, but GivTCP OK — how do I get GE to unstick it?
- AIO Gateway and battery restart procedure
- Battery Voltage Low
- Inverter Wifi & Virgin Media
- No solar production on Energy Graphs??
- Gen 1 Hybrid Eco mode and overnight charging (again)
- Inverter upgrade?
- Disconnect second battery question
- Battery Charge / Discharge Anomaly
- Shelf above inverter
- Adding extra panels, any commissioning required?
- Inverter ignoring time charge sessions.
- MONTHLY REPORT ERROR
- Slow battery drain
- Calibration bricked batteries?
- EMS for Hybrid inverters
- Charge Battery overnight and export during the day on IOG
- Octopus IOF Behaviour Changes on Hybrid LV kit
- Displaying EV charger data in the inverter portal
- Gen1 Hy 5.0 and two 9.5 batteries
- Advice. Please.
- Server Initiated Automated Mtc Dongle Firmware Version
- Timed Charge & Export Slots Not Saving on GivEnergy All-in-One – Any Fixes?
- EV Charging Draining GivEnergy Battery Instead of Using Grid – Any Advice?
- Gen 4 lands on ENA database
- SEG provider
- Turning off inverter ssid, good or bad idea?
- Inverter doesn't work after restart
- 5Kw hybrid inverter
- EVC Power now visible on the Power Graph card
- Portal data time base on GMT not GMT + 1 hour
- Does GivEnergy support multiple single phase inverter setups?
- Smart Export
- Batteries not charging
- Summer Solar Production vs Previous Years?
- No solar production?! - is this an inverter issue?
- Observations on the Firmware update process
- Battery goes missing
- grid import to battery without timer being set
- Inverter query max input/output
- Lan connected Inverter
- DC discharge set to 0 from 'Server' External Change detected
- Why does my inverter use 8 IP addresses (v4)? Is this normal?
- 4th battery and still not quite right - what next?
- Crazy stats and unexplained error.
- Inverter locked
- Hypervolt pro 3
- drawing power from grid not battery
- Wired ethernet connection to inverter
- GE HY 5.0 G3 Battery discharge rate
- Batteries not charging from grid
- GEM120 meter display
- Messages - API - Inverter Settings - Winter Battery Conditioning
- Inverter sitting Idle after battery firmware update + Battery problem
- GivEnergy Hybrid Inverter Accessories
- Battery & inverter problem
- Firmware update for battery and inverter
- Island Mode, critical Circuits and wiring
- How to keep the battery powering house when Grids down
- New user - Hybrid 3-phase inverter & 3 batteries + solar + EV
- Adding an EV charger using a Harvi and replacing solar CT clamp
- BackUp Overload Fault
- export data way off
- Anyone here got the new single phase HV inverter?
- Inverter Offline but Accessible Locally
- Gateway Communication Failure(s)
- GE just nerfed the rate of charge/discharge of my batteries...
- Thermal solution for indoor inverters
- GE Consumption Data vs Home Assistant Data. Help
- PV system payback in less than 5 years?
- METER COMMUNICATION FAILURE ERROR
- gen 1 3.6 clipping?
- Does setting Inverter output limit also limit EPS output?
- Best SEG rate provider
- Inverter firmware will be upgraded to D0.316-A0.316
- Firmware Release
- battery discharge woahs
- Any benefit to fitting Gen 3 (or Gen 2) batteries to a Gen 1 Hybrid
- Why is my battery charging from the grid outside my chosen time frame?
- Mixing Gen 3 Hybrid 8kw inverter and Gen 1 battery
- Solar generation.
- Charging slots ignored since latest FW update
- GE solar system repeatedly failing updates
- Intelligent Octopus Flux (IOF)
- Are some solar panels adaptive
- WiFi dropouts
- Non-AIO EPS Changeover Box
- Export Question
- Battery not charging from grid after f/w update
- Octopus smart meter export data missing
- Unable to charge the battery from AC power after 315 firmware upgrade
- House load anomalies
- GivEnergy EV charger questions (or rather disappointments)
- Battery Capacity read error?
- Export showing as house load?
- Latest Firmwares & RealTime Control Release Notes
- GIV-HY5.0 Inverter firmware D0.315-A0.315
- Gone to pot after inverter update!
- Tariff Juggling
- Anyone going to the Solar & Storage exhibition next week
- DO.920 Issue
- Unable to control GivEnergy battery
- D0.315-A0.315 Firmware
- Control Settings
- Can I Manually start Calibration and should I load 3017 battery update
- Broadband down - set Inverter to ECO Mode ON
- Low Cell Voltage - recalibration
- Night Time Solar Panel Voltages
- Connection to inverter lost
- Firmware update problem
- Direct Ethernet Connection to GIV-HY3.6
- Best ways to do multiple inverters?
- Inverter Offline
- Inverted Readings
- Inverter problem.
- How safe is it to remove the dongle and copy the files?
- Getting PV data to display on PV data tab
- Battery Appears to be off
- Unexpected Battery Consumption: Need Assistance
- Optimal configuration HELP
- Battery stops exporting around 15-25%
- What was going on here?
- Low Grid Voltage
- Good feedback
- Inverter offline in cloud portal
- Suggestions for battery / inverter cabinet
- Bizarre battery discharge, cannot stop it
- Givback resetting charging schedules
- Failed dongle on Gen 1 5kW hybrid inverter
- Latest App Update
- !Please be aware! AIO and Gateway install likely does not comply with BS7671
- Expanding an existing installation - help needed!
- Battery / inverter AC - DC - AC efficiency
- AIO and Hybrid Inverter together?
- Bricked Dongle on Gen 1 inverter
- Going off Grid for the summer.
- Inverter not using power from the battery
- App data seems inconsistent
- Can an Inverter prevent a battery fully charging?
- Random battery calibration message
- 8 & 10kW hybrid inverters with 10-80kWh high voltage stackable batteries
- How can I get some Support from GivEnergy to resolve my problem
- Current spikes and tripping fuses
- Backup overload fault
- Battery Storage Upgrade Options
- Unable to change “Timed Export” start/end times
- Buzzing or coil whine
- Timed Discharge - Multiple slots?
- timed charge not working
- Timed Charge randomly disabled
- Help with understanding temp throttling please
- ideal voltage for givenergy
- Gen 2 Hybrid only one charging slot available in portal
- Off grid house - back up options
- How to disable hybrid inverter's WiFi access point?
- Cybersecurity Inverter
- Adding Batteries to Hybrid Gen 3
- Inverter offline after update
- Another newbie.
- Connection Issues with WHx Gen3
- Discharge Slots
- Missing Wifi Dongle
- Swapping primary and Secondary Batteries
- Inverter error - Consistent Fault
- Constant problems changing tariffs - IOF to OF
- Can I trigger a recalibration?
- New Dongle Chipset and GivInstaller
- Giv 5.0 Gen 1 - charge/hold/discharge woes - WW
- Battery/inverter not working properly
- “Timed Export” is very limited
- Hybrid Inverter 3.6 gen1 ethernet connection
- Can I utilise mobile hotspot to connect inverter - Fallen tree Internet down
- Firmware upgrade mentions gen 1 battery but I have gen 2?
- GE: RELEASE THE EMS
- Inverter settings
- low battery discharge issue
- Smart meter stopped communicating, Inverter doesn’t use the battery
- Inconsistent battery export
- Showing EV stats on the portal cards
- No API tokens listed when there should
- Altering the low % limit on the battery
- Gen 1 battery charge rate increase
- Multiple Battery Charge Slots
- 3.6 Gen 1 Power Useage Change
- Inverter & Battery Firmware update failed
- Battery charge and discharge rate
- Battery Charging when set to export at percentage
- Has battery export rate been (secretly) reduced by 3% (9.5’s)?
- Battery discharge rate halved
- Changing from IOF to Octopus Flux on 1st November
- CHGDIS Module Temperature Fault
- Trying to switch to Octopus intelligent flux
- Adding 2.6 to existing 9.5 and 5.2
- Battery Charge Power 2.7KW instead of 3.6KW
- Charge/Discharge
- Charge schedule 2 being ignored?
- Timed Charge periods
- GivBack event
- Grid not battery being used for morning kettle boiling
- Battery not discharging to cover home usage
- Additional Batteries
- <Inverter> <Control> <INVERTER Max Output Power>. What’s it for?
- Battery Failure
- Cell voltages - when to intervene?
- Will the battery reserve automatically release during EPS operation
- Setting to the correct time
- Inverter not responding to any requests
- VLAN isolation for gen3 hybrid inverter?
- Cell Variations and 100%
- Simultaneous Timed Charge and Solar Charge
- Winter Strategy
- Inverter doing its own thing. No control
- Octopus intelligent flux - random and nonsensical battery charging
- No energy graph readings
- Eco mode not working
- Inverter not communicating with Cloud- have already reset etc
- Winter Strategies
- new gen 3 5kw hybrid fitted in place of my old AC3 inverter
- Wired Internet Connection to V2 Hybrid Inverter
- Inverter temperature and efficiency
- Firmware - upgrade or not?
- Solar / Inverter issues
- Inverter MCB Tripping
- Gen 2 - 5kw Hybrid Inverter keeps losing settings
- Adding second 9.5 kwH battery
- Upgrading inverter from 3.6 to 5.0KW.
- Trying to understand Inverter Behaviour
- Battery More Information in App
- My inverter cooling solution
- Lost settings, what should battery discharge be?
- Inverter running temperature 65C +
- Why am I using power from EDF?
- Firmware update....should I have just left it alone :(
- Battery export & SEG query
- Hybrid Gen 1 Battery several Overvolt Notifications disappeared
- Notifications
- Anyone resolved preference for grid use for load after timed export finished?
- Can I rely on the SOC%
- BMS Over Voltage - Almost Daily
- Discrepancy - load power between portal and app
- String 2 no power ?
- Query on wattage power between strings
- Adding more panels
- Data in wrong columns in monthly energy graph CSV
- Adding extra solar (third string) to existing setup
- Live monitor display
- Adding AC3 invertor to existing setup
- High load and double engergy consumption post installation
- Gen 1 Hybrid Failing to Charge Overnight When Battery at Reserve
- Inverter offline after firmware update
- Reboot query
- Grid Export Limit Maximum Too Low?
- Battery Temperature
- Hybrid inverter battery not charging
- Advice please on ECO mode?
- Variance between SOC for 2 Batteries
- Firmware Update without my permission
- Home batteries self exporting!
- 3 phase system grid voltage out of range
- Battery reserve vs export discharge limit
- Hy5 Gen3 incorrectly importing from grid
- hybrid 309 and discharge limits
- Battery not charging to 100%
- When Idle ? (dual inverters)
- Installing 2 Hybrid Gen3 GivEnergy Inverters
- PV power calculations
- Grid import when battery 100%
- Disable LEDs on inverter/battery
- Hybrid 5.0 export limitation
- Is my inverter correctly limiting output?
- System does not automatically recover after a grid outage
- Battery percentage dropped rapidly but only discharging 100w
- Strange readings
- Max battery charge percentage on solar?
- Inverter Swap AC3 to HY5.0
- Why Generation Report differences
- 10kW Inverter Tripping / 14.5kW of panels..?!
- New Octopus Flux rates from 1st July 😢
- Forced Firmware Update this morning.
- A strange new battery charging problem
- Set Export parameters
- No grid import or export - inverter CT clamp config issue?
- GivTCP log errors
- Timed export via Home Assistant issue
- New firmware D0.309-A0.309
- EPS for new GivEnergy 3Phase hybrid inverter
- Strange goings on… Only using grid power on ECO mode
- Charge rate when 'paused' changed on FW915
- "Brick wall" at 1600 yesterday?
- Record generation
- Gen1 hybrid: full export behaviour
- 3-Phase 11Kw Inverter & Battery | 10.18 kWh | (3 Packs)] with BMS
- Timed export Gen 3
- Local software update as remote update failed.
- New Inv Firmware D0.915-A0.915 & Battery only charging to 90%
- New Battery Firmware
- Dongle flakiness
- Time setting
- MPPT issue ?
- PV Excess Exporting Not Charging Battery
- Hybrid gen2 5kw max solar export limit
- Gen2 Hybrid Firmware update
- Temperature & SOC reading dips
- Separate LAN connections required for AIO, EV Charger, PV Inverter and Gateway?
- Backup supply from Gen 2 Hybrid
- BMS Over Voltage notifications
- Smart Tariff and server error
- Use inverter's access point for zappi?
- Corrupted settings on Gen 2 inverter
- Gen 3 hybrid inverter temp
- Battery and Inverter temperature report
- Mixing different panels on a string
- Battery not discharging properly
- Expected output for 3.2kW system
- Issues with secondary battery staying at 100% after BMS over voltage
- Battery charging issue via solar
- is there a default password for your inverter ?
- Clipping Statistics - How
- connecting to different wifi module
- How long after firmware update before battery cal starts?
- Force export of 100% PV solar production?
- One battery not discharging
- Minimising clipping
- Gen1 HY 5.0 crashing
- Battery SOC gone 'odd'
- Hidden wattage usage
- Conversion losses calculation
- Gen 1 hybrid new “fast response” firmware
- AIO “too full” in Island Mode
- Maximum Grid Export Gen 1 Inverter
- Battery Calibration Stuck?
- Service App shutdown
- panel voltage activation
- 0W/0A on PV
- battery running costs
- BMS Over Voltage
- Automatic Firmware Update
- Battery trip
- Gen 2 inverter and new induction hob
- Anyone else seeing incorrect £ values on Octopus in-home display?
- Panels only generating 1w
- Confused about export
- Battery Data with more than one battery
- Solar does not feed load when battery is charged above Charge To level
- 6.4kWp panels producing 6.7kW in April
- Electricity Meter Com Fail
- Givenergy DC 9.5 kwh Battery discharge (DC to AC conversion)
- Solar panel rating
- Re PV system, can I change the names of "String1" and String 2"?
- 2nd battery installed
- Hybrid Gen2 Inverter 'clicking' and not providing battery power
- Battery timed charging problems
- beta firmware - export
- Inverter Software Update
- Discharge power set to zero but still discharging
- Inverter + Eero (aka getting Home to work) – experience/guide
- Inverter <-> Portal Security
- Battery % difference when discharging with two batteries
- Hybrid 1 Settings
- Help required with Ovo and 2 mpan meters
- Help with home assistant YAML to reduce clipping
- Battery Discharge Rate is Low
- Maximizing Intelligent Octopus Go plus 15p export
- Hybrid Gen2 Firmware Update
- Clipping causes inverter to oscillate generation
- Inverter not charging battery or allowing to discharge
- ‘Electric Meter Com fail’
- HY-G3 - oddities in charge/discharge limits
- Electricity Meter Com Fail after firmware update
- change of wi-fi network
- discharge bug
- Why is my inverter only charging at 290w off the grid?
- Better graphs?
- Ohme Pro
- Inverter settings
- Battery Discharge
- Max inverter power
- Battery discharge to grid
- Gen 1 in Idle Mode
- Stop charging and export solar
- Wifi security limitations
- Offline
- The Possible Threats by Handing Control to Outside Parties
- WonderWatt - How do they make Money? - Battery Discharge Octopus Agile
- Octopus bill error
- Inverter Cooling - Sharing my solution
- Does 'grid first' work on latest gen-3 hybrid firmware?
- Gen 1 Hybrid inverter swap
- Battery Charge/Discharge settings during EPS
- My Dashboard has strange message
- EPS enabled
- Zero charge overnight?
- inversion losses/overheads
- PV generating jumping around
- Low charging rate
- Question to those with hybrid + a/c coupled inverters
- Is my battery dead?
- Inverter showing error message - how do I resolve the error?
- inverter fault
- not showing power from grid
- Won't reach full charge since inverter firmware update.
- Adding Additional Battery to existing system
- No Battery Data, App saying No Battery Connected
- Wifi Dongle lost connection and bad password
- AIO with Givenergy Hybrid inverter
- Im start getting fedup with sytem.
- G3 - Whine
- Selling House - Transfering System to New Owner
- Strange inverter behaviour
- G1 Hybrid PV MPPT string start voltage
- "Updating Inverter ARM" during firmware update
- Firmware D0.913-A0.913
- Gen 1 3.6kw Inverter
- Inverter Stuck Charging Battery at 290W
- Christmas Pub Discussion
- New install - does these reading look correct to you ?
- Circuit breaker tripping more often since solar installation
- Time Export Mode going to house not grid
- Should the battery charge during a power cut?
- BMS Firmware request
- Inverter doing… odd things
- Upgrade to Battery Firmware 3015
- Wrong Inverter model shown
- Communication issues on AOI....again
- Saver Sessions and Export kWh
- Every day, my Inverter keeps changing the auto charge battery time by itself.
- Gen2 Hybrid Inverter Firmware 912
- IS it time to upgrade firmware
- Battery losing SOC when discharge set to 0W
- Missing option to create API Key
- Saving Sessions ?
- Inverter Load
- How to turn off inverter indication lights
- AIO with Hybrid + Battery
- Random load spikes
- Battery not charging in off-grid mode
- What’s a normal “Healthy” voltage range for a 9.5kW battery?
- No LEDs on Hybrid 2 inverter.
- WiFI Connection Issue
- I'd like a bigger one...!
- Batteries not discharging
- Battery charging at less then rated power
- Battery dumping to grid
- Selling House - can the new owner keep the data from last 2 years?
- Oddities with new HY5 gen3 / 9.5kWh - charging rates
- Firmware release notes
- Regularly charging to 100% ?
- Extreme weather and conserving energy
- Battery randomly stopping discharging
- Configuration question from a prospective customer
- Why Hide?
- power import despite battery at 22%
- 9.5kWh battery sudden drop
- Useful Reports ?
- Battery not powering the house
- No Grid to home after smart meter install
- LEDs too bright
- Battery won't force change when at >20%
- Octopus R&D Labs scheduled events not producing expected results
- Essential Supply Output & Battery Reserve
- Wifi Dongle wont reset
- Conversion Losses
- Lengthy planned power cut
- Inverter Type
- Battery not discharging / SoC issue?
- AC Charging when the sun is out.
- REQUEST FOR NEW FEATURE
- Octopus - switching back to Go from Flux
- Flickering LEDs after solar install.
- Smart meter installation
- Just got Flux - Now what ?
- givenergy cloud - anythign wrong
- Battery charging changed yesterday and today.
- Adding a 5.2kwh battery
- Battery failure (red status light)
- Gen hybrid 3 inverter efficiency.
- Internet connection on gen 3 inverter
- "GivEnergy-Octopus S. (GivEnergy)" user setting strange settings
- Unprompted Battery Calibration run
- Idle Battery 70% to 0%
- 3-Phase Solution
- Battery suddenly charging and discharging from grid
- Battery power in vs out...
- AIO firmware upgrade from .607
- Inverter charge/discharge settings not correct
- Battery charges to 100% and then discharges about 5% to the grid.
- Battery drop to 0% with no reasons
- Adding a new array to an existing GivEnergy system
- Battery Not Charging to Set Level
- Wind turbine
- Anyone able to get through to telephone support?
- Gen 3 - Battery Power Cap Ignored
- Reset wifi on Gen 3 inverter
- Gen 1 inverter with two batteries - max simultaneous charge rate?
- Timed charge Fill up to........
- Unaccounted battery usage
- inverter offline/timeout
- Limit to charging only from the grid
- Battery suddenly dropped to 0%
- installer Support
- Max output questions
- Replacing AC coupled inverter with hybrid, maybe
- warranty
- Battery input and output rates
- unscheduled calibration ???
- Connection Lost - cant reconnect
- PV to battery during power cut?
- Battery discharging below set limit.
- Max charge/discharge rate of 5kw inverter & TWO 9.5kwh batteries
- 10.66kW Array
- Gen3 user's check your charge and discharge rates on the portal!
- Hall Sensor Fault?
- Newbie to Solar, Batteries, etc.
- Wi-Fi disconnect at 3:30 in the morning
- Battery about to pop?
- Is there a way to stop the wifi dongle making it's own Wifi network?
- 9.5 kWh Calibration - only charged 6.7 kWh
- Low discharge and charge numbers
- My Inverter stopped!
- 3013 should I?
- Another Unexpected Calibration?
- High cell voltage
- WiFi security
- Battery "Operating Range" ignored
- Random battery over voltage and SOC to 0%
- Beeping inverter
- Battery pairs charging with 25% difference
- SoC Crash...Here's what happens
- Inverter not charging from solar
- Battery at 0.0%
- Changing internet provider
- Very Slow Charging - Firmware Bug
- Scheduled discharge reserve
- Gen 1 to Gen 3
- Battery stuck at 100%; grid supplying power :(
- Grid voltage fault
- How exactly will the upcoming EMS function?
- Octopus R&D Labs stopped sending ECO command 14th June
- Eco mode apart from a timed discharge
- Moving inverter to AP mode after connection to home wifi is established
- Remote control history missing
- Post S/N 2209 Gen1 Inverter firmware upgrades
- Battery not discharging properly
- Gen1 5kw temperature
- Will solar recharge the battery during grid outage and EPS in use?
- Question re Gen 1 Hybrid firmware
- Forced Battery Firmware Upgrade
- Hybrid and AC Coupled. - two batteries?
- Intelligent Octopus battery drain.
- Gen3 5kW Hybrid - Very High Temps (77c +)
- D0.305-A0.305 Firmware
- Max Battery voltage : What made this change.
- String level energy generation report
- Battery loss exceeds all loads during the night
- Old Inverter Notifications Clearing
- Process to rectify stuck firmware update?
- Sudden increase in data points
- Rookie question re Generation over 5kWh?
- Batteries capacity - from app info
- How do I change the WiFi network the inverter connects to
- Home Assistant automation question
- EPS electrical work - who and price
- Target SOC Dropping to 25%
- Battery Not Discharging
- Command Corruption
- Wind turbine with a Hybrid Invertor?
- Prepartation for additional battery?
- Battery discharge at night
- Battery charger issue
- Battery charge ignoring % limit
- Quick settings - discharge now
- Scheduled export upto specific Battery SOC
- Gen 1 GIV-HY firmware
- Solcast PV forecast stopped working!
- Battery loosing charge
- Battery not charging fully overnight
- Multiple battery charging question
- Inverter issue?
- EPS Use
- Is the Gen1 inverters no longer getting updated firmware?
- EPS wiring question - re earth
- SOC dropped with no consumption
- Importing/Exporting Switched
- What size RCD should be fitted for inverter?
- New Firmware - Increased Battery Wattage Output?
- Octopus Tracker IMPORT Tomorrow : 8.72p/kWh!
- Update batteries from 3009 repeated fails
- Firmware Update Available
- Upper Charge Limit Ignored on Timed Charge
- Battery discharging to grid
- Forced charge issue
- Battery idle in eco mode
- Battery charging from Grid
- MPPT, Bypass Diodes and shade.
- Battery Cell voltages - Problem ?
- Frozen battery
- Inverter temperature (again....)
- Inverter not seeing charger
- Impact of high grid voltage on Gen2 Inverter?
- Behaviour with PID Espresso machine
- Battery not supplying house load
- Why is PV sent to battery when house is importing from grid?
- Very poor Givenergy aftersales care
- Battery issues / advice needed
- Inverter forgot/lost wifi connection
- GivBat 8.2 G1 or 9.5 G2
- PV output and grid pull has just gone very variable
- GivTCP energy flow graphic. No line for EPS
- Overnight tariffs and charging Battery, EV and Eddi
- Safety Concerns with Voltage Optimisers
- Pre S/N 2209 Gen1 Inveter firmware Upgrades
- Inverter Firmware update failed - now Red-Fault
- How do you force charge via web portal?
- Battery is not getting utilised fully when sun is out and battery is full
- Scheduled battery discharge issues (Octopus Flux)
- Fluctuating PV Power on clue blue sky day, no clouds please explain?
- Optimal flux settings
- I decided to build my own professional IHD setup
- All in one launched... and price!
- App showing that the house is using 700+watts
- Adding solar panels? considerations, issues, advice please!
- Inverter temperature - warmer weather?
- Sustained home consumption during battery charging - odd behaviour
- PV anomaly
- Meter change & CT clamp direction & excessive house load
- New system not working correctly...
- Praise to 909 Devs!
- Open wifi network
- Rapid charge/discharge cycling when battery full
- Export limit
- No solar power
- Battery took a dump
- Buyback program
- Help please….Local Monitoring
- Ideas for why battery isn’t covering the evening load?
- Reduced PV output with clear sky
- Unstable generation
- 3.6kW or 5kW inverter
- PV string calculation/comparison
- Battery slow to take over load after Flux off-peak
- Firmware update then battery calibration hang
- Analysis of Daily usage
- Inverter Power Reporting Issue over 440V
- If and When to update firmware...
- Request - Reports emailed as PDF
- HA 2023.5.3 / GivTCP 2.1.13 issues
- Discharge mode not working/ still drawing from gris
- Octopus export - standard fixed tariff - time to fix before its cut?
- Set to 50% SoC Max if Away?
- Firmware (sorry) stuck @20% and now stuck @49% charge
- Multi-Inverter Output Voltage control during export
- Battery still exporting to the grid after firmware update
- Adding another solar array
- PV During Calibration
- Battery Jumps to 100% Even After FW Update
- New Firmware - Fantastic work!
- Firmware update no solar
- Meet the latest generation of the GivEnergy hybrid inverter: Gen-3
- Gen 3 Inverter is here
- Gen3 and future roadmap/wishlist!
- GivEnergy Battery Discharging to car
- Unexpected Charging
- New update not working
- Empty battery and commissioning problem
- Post BMS Update - data anomolies
- What should I see happen with battery firmware update
- Firmware update - calibration finished very quickly without full charge.
- Firmware update failed
- Battery discharging to grid
- Firmware Update
- Solar Production drops as soon as battery is fully charged.
- Should I heat water via gas boiler or via emmersion heater
- Battery In to Battery out from app/portal
- Rcd specification for hybrid inverter.
- GivEnergy readings vs Octopus readings.
- HELP! Accurate consumption figueter Data tab VS Energy Graphres from M
- DMEGC Panels
- Turn off export
- Battery Charge Power - GIV-HY5.0
- Single String Solar Capping Gen2 Inverters
- Importing from grid when battery almost full
- Batteries showing different Percentages- Why?
- Battery discharge dropped to 1kw
- Dual Inverter Voltage Control
- Battery either discharge max or not at all
- Exporting to the grid in the evening. What is the reason?
- New givenergy install, no generation after battery full
- Big Import / Export Discrepancy
- Start voltage clarification (Gen2)
- “Lost” battery storage (sometimes)
- Battery discharging to grid when plenty of solar
- Smart automation?
- Random drop outs - Any advice appreciated please
- Charge/discharge rates for 2x5.2kwh batteries with Gen 2 hybrid inverter
- Inverter & battery working in an odd way last 2 days or so.
- Clipping and " Top Slicing PV", and what the battery modes actually do.
- wifi dongle with unknown password
- Spontaneous Calibration?
- GivEnergy & Octopus Dashboard
- SEG tariff
- Dual intertor / battery... Is the output combined?
- SOC bug causes reduced generation for the rest of the day
- Is one of my strings not working?
- Cannot supply house from battery during sunlight
- Slow start in the morning, is this a (known) MPPT issue ?
- Battery Discharge When Exporting Problem - Any help please?
- Grid usage when battery is full
- Setting "Charge rate -> 0" ignored on Hyb 5.0 Gen 2 ?
- Generation sudden drop when weather consistent
- New user, battery issues
- Summer Solar diversion to a Sunamp battery
- Bird Protection Installation Query
- TheDragon
- Doesn't work with Octopus Flux?
- Incorrect time on graphs
- Two inverters ??
- EPS Max wattage in normal on grid conditions (Not a black out)
- Reports to show time of grid usage
- Hyb 5.0 Gen 1 to Gen 2 - hints
- Divert PV generation to battery instead of the home?
- Upgrade Hybrid Inventor 3.6KW to 5KW.
- Newbie PV + Battery - Couple of questions please?
- Electricity Meter Comm Fail
- 2.6Kw Charge limit on the 9.5Kwh Battery?
- BMS occasionally disconnecting, anyone else?
- Potential new tariffs
- Upgrading Gen1 or adding a second inverter?
- Automatic EPS equipment size
- Inverter export cap
- HY5 inverter and SmartLife app
- Battery gone native!
- Summer time?
- Gen 2 WiFi question
- Hybrid Gen2 - MPPT tracker performance - With East/West strings
- Cannot connect to WiFi
- Increasing Battery Voltage
- Domestic Wind Turbine - GivEnergy Inverter and Battery
- System Modes
- Inverter startup voltage
- Battery depleted
- Inverter reverting MAX AC charge %
- Wrong commission and warranty date
- Two batteries, battery percentage
- HY5-Gen2 - Charge power - Not all settings actually work
- Gen 2 Inverter temperature?
- Generation Meter
- AIO gateway and hybrid/AC3
- Inverter Status at Idle following Battery Charge
- Gen2 Hybrid Inverters Cross charging
- Octopus Agile but Exporting
- Can a Gen 1 hybrid Inverter connect via LAN?
- SIM dongles lost connection
- Recommended overnight charge percentage
- Battery Charges to 100% then Discharges to 95% even though excess solar
- 1 string / 2 orientations
- Inverter Swap gen 1 to gen 2 fault
- Amalgamating two different systems
- Invertor swap - lose generation data?
- Questions about new Gen2 Inverter
- Battery voltage at empty
- Home insurance fo4 battery and inverter.
- Battery Settings Not Working Correctly & Affecting Solar Charge
- Excess PV being exported to the grid instead of charging the battery
- "Hybrid Inverter 5.0 Generation 1" contains battery?
- Adding a Wind Turbine to a GE setup
- Why is my battery discharging to the grid?
- Inverter error message on Web Portal
- 2600w
- That's Much Better
- Inverter dead?
- Web Portal and App not working for me.
- Payment for export before DNO approval?
- Oversized array and gen 2 3.6kw
- Gen 2 wifi reset
- Unexpected overnight charge to 100%, battery no longer discharging
- Exporting to the grid not charging the battery
- Multiple charge periods
- Automations
- East West cells with 5kw inverter.
- Why does my "Target SoC" return (un-commanded) to 100% every night?
- What system to go for (take 2)
- Setting up installer account
- Monitoring output from 2 PV panel arrays
- Battery not charging?
- EM115
- Mesh network connection issues
- Panels on generating max when forcing battery charge
- What to expect during a power cut
- AC-DC, DC-AC Losses query
- Strange behaviour/readings
- GivEnergy Hybrid inverter, and other generation
- Solcast Predictions - Accurate or Complete Waste of Time?
- Single Phase Inv/Battery on House with 3-phase supply
- Repeated dropouts and missing data.
- Battery charge settings query
- The Unofficial Community Discord
- Per string daily generation
- Battery regularly discharging to grid?
- 10pm cutoff
- Is my grid import and export the wrong way round?
- Post EPS installation tasks?
- Losing wifi connection
- Battery charge rate
- new feature, change settings by month
- Easiest way to stop battery discharging until 5-6pm tonight?
- New user questions
- Leave Feedback - notification they have been recieved?
- Panel defrost button not working
- Sunny day but looks like a lot of bugs.
- Givenergy Full Set
- Impp - Matching cells to inputs.
- Overall system conversion efficiency
- Voltage on unconnected string
- Additional battery DNO application
- Expected battery efficiency?
- Solar going straight to battery
- Battery charging from grid outside defined charge period
- Help! Cannot Stop Batteries charging From the Grid
- Firmware and Software versions
- Inverter settings - strange behaviour
- Winter generation
- Any plans to support Intelligent Octopus?
- Where is my PV power going?
- Boxing in outdoor battery and inverter
- Zappi v2 stopped charging on Eco+ since GivEnergy battery installed
- OK to regularly charge to 100%?
- How idle are you?
- Grid voltage fault after power cut, can't clear error
- Small generation to grid not battery?
- Dynamic adjustment of battery charge level?
- Inverter Offline
- It's Very Quiet on Here Today.....
- Octopus smart tariff price incorrect
- ECO mode, but exporting
- New owner questions.
- Avoiding battery use in cheap rate periods?
- Connecting a Solar-capable Smart Charger
- New GivEnergy Inverter & BMS Firmware Beta Testing Chat
- Battery damaged?
- Can't get access to my Dongle.
- Retrofitting a battery to existing solar installation
- Anyone know about the availability of new inverters/batteries?
- Givenergy 5kw hybrid inverter gen1 charges and discharge query.
- Idle full battery yet drawing from grid
- Battery charge capability in 4 hour Go window reducing
- Battery drain
- Batteries Discharging / EV Charging
- Best seetings?
- Export limiting option
- Gen1 mixed with Gen 2
- Max Export from Giv-HY 5.0
- Inverters won't respond to house load?
- Existing FIT System Metering
- Hybrid inverter error - Timeout Error, restart failed
- Excess PV not going into the battery
- Urgent Security Issues
- Inverter Firmware Update / from 3.6kW to 5kW
- Timed Charged
- Forcing battery charge (discharge) now?
- Voltage drop on second inverter PV generation
- Efficiency
- Noisy Giv-AC 3.0 Inverter
- Best way to have 30kwh of batteries?
- AC Inverter vs Hybrid Inverter?
- What will my stystem do in a planned 3hr power cut?
- Battery settings changing
- Daily Sustained Spikes in App
- CT Clamp Configuration
- EPS connection Yorkshire
- Clock still on BST after server sent update
- GivEnergy support experiences? - email, remote, callouts
- GivEnergy Hybrid Inverter and Battery with Zappi
- Inverter Extended Warranty transfer
- Inverter Temperature
- Monitoring Cell Health- Home Assistant wizards
- 2 inverters and 3 batteries?
- mixing PV panels
- Solar Installation Costs
- MPPT not finding global maximum in V-I curve
- Firmware
- Odd inverter behaviour - sudden zero PV and battery discharging
- Upgrade from 5kW Hybrid Gen1 to 5kW Hybrid Gen2
- Update on Gen 2 Inverters
- Mesh Routers
- Any updates/ETAs on EMS?
- High load showing when generation is high?
- Two Solar PV Systems with one on FIT one No-Export?
- What is the max solar input with the Gen 1 3.6 Hybrid?
- Grid and Battery at 0W
- 3.6kw or 5kw Inverter
- No accurate home demand and grid import/export data
- Bringing a 30Amp AGA cooker into the mix
- 9.5kw Battery charging
- Automatically charging when Octopus Agile rates are lower
- How do I stop the battery discharging to the Grid?
- Economy 10 - Tariff Options
- How noisy is the Inverter
- Inverter clicking, battery flat
- Dongle Playing Up
- DCMCB tripping?
- Power consumption error
- Second battery install options to increase max charge power.
- Battery just jumped 20% up to 100%?
- dual HY3.6 installation questions
- Live discharge Watts
- Inverter died last night
- 9.5 battery fault
- Battery charge rate capped at 2.6kw
- Warranty extension
- Intelligent Octopus during night and solar during the day - battery charge
- Dual 5kw hybrid inverters
- Gen2 Inverter Availability
- Finding a local installer in Wales..
- Download all inverter data
- Future proof G99 Application??
- New install question
- Inverters fulfilling the load twice, leading to unwanted export
- Battery backup in powercut
- Advice on New Battery & PV with Existing PV
- Equipment combination help
- Hybrid Inverter and Solar Divert
- Number of CT clamps?
- Battery/Inverter stock
- Commissioning Issue
- Dongle WiFi Connection
- Can only extend warranty within 60 days of commissioning
- Enable DC Discharge
- Home consumption figures incorrect on app and web portal?
- Export to Grid
- Extra panels on existing array.
- Hybrid - charge battery from DC and AC at same time?
- Lost PV - IDLE after attempting to connect to invert IP
- Weekly Givenergy updates knocking system offline
- SEG Scottish Power and Battery
- 8.2 Battery and 5kw Hybrid inverter - No solar panels?
- Solar Panels positioning.
- Gen2 inverter
- Dual Inverter
- HY5 Gen2 Update firmware
- getting data from local network. for dummies if possible!
- Wrong time on Inverter
- Eco mode disabled after scheduled export?
- Advice on best system setup
- Grid/Consumption Seems Way Off
- Maximum Battery Discharge rate for 5Kwh Hybrid Inverter?
- Melting input
- App Problems - Often Have To Restart My Inverter - Is It Just Me?
- GIVENERGYHY 3.6KWH INVERTER WITH BATTERY
- Resuming Battery to normal operation - (Play)
- iBoost vs battery conflict
- Updating the inverter firmware
- Octopus Go Rate Card
- Smart meter v GE
- consumption; solar pv generation; no import or export; battery not charging
- System failing to discharge
- Support for 3 x inverters
- M2M Server - Chinese
- Array kW vs Inverter maximum
- Battery not discharging
- Gap between PV drop off and Battery Engagement
- Is it expected that the inverter "plateau's"
- Correct inverter size?
- 3.6kW inverter suitability for 6.9kW array
- Battery not charging
- Hybrid Inverter Gen2 - WiFi device
- Inverter offline + internet "sleep"
- Hybrid Battery Priority Bug?
- Givenergy and diy battery?
- Dongle Connection.
- Issue with android app and cloud service.
- Product suggestion for GivEnergy
- Adding a 2nd Hybrid inverter...
- Hybrid inverter - Metering options
- Inverter - System Mode settings
- AC3.0 or HY3.6 ?
- Reserve power discharging at 9pm (no setting to adjust)
- Settng up a change to import Tariff
- Inverter & Battery Sizing
- Trigger Watts for Starting Battery Charging
- stop grid charge my battery
- Max power from Giv-HY 5.0 Inverter, from battery.
- How accurate are the import from grid metrics?
- Inverter Flashing Green - not force charging
- Prevent battery charging at set times
- Export mode
- Battery power 'reserve' confusion
- PV Performance dropping...
- Darn it! my inverter's clipping...
- Where should I install the battery and inverter?
- Hybrid and AC coupled Inverters
- Panel compatibility with gen 2 inverter
- Adding new 9kwh battery
- All blue lights on front of inverter are off
- New dashboard/recent installation - system mode has not effect
- Giv-Bat 9.5 max discharge
- DC Isolator between Solar panels and Hybrid Inverter
- WiFi
- Possible new installation
- GivEnergy, Eddi and Hypervolt car charger
- Can Hybrid Inverter act as AC Coupled Inverter
- Remote CT sensor
- Gen 2 AC inverter?
- Inverter Efficiency Pt 2
- Backup power installation
- AC Coupled or Hybrid for future expansion
- Is live support no longer a thing?
- Maximum Inverter Output Power on Battery Only
- Problem adjusting power settings via new dashboard
- Check Inverter Export Limit
- GMT vs BST
- Overnight top-up prediction algorithm
- App Shows Grid Export when Battery Is At 19% SoC
- Reported Issues and resolutions
- Inverter Efficiency Experiment
- GivEnergy Teams call
- Battery output "flatlining"
- Incorrect Consumption/Grid to home values across all monitoring systems
- New Installation/Member
- Zappi/Eddi holding onto battery output - export margin experience
- Zappi/GivEnergy Integration?
- First "full day" of generation!
- WiFi router rebooted now USB dongle flashing and not connecting?
- Extended Warranty
- Inverter has gone to sleep
- Battery / Inverter Tripping RCD
- Timed Discharge
- Inverter Firmware Confusion
- Battery status light is red
- Sudden Drop in Battery SoC
- Secondary DC Coupling
- Added a fan to the Inverter and it helps
- Battery connection
- My Negative Support Experience
- Mesh Wifi and Dongle
- EON partnerhsip
- Is there a way to stop exporting?
- Inverter Firmware
